Sell Encore Wire in Ohio

Ohio Wire Buyers buys reusable surplus Encore wire and cable from businesses anywhere in Ohio, including full reels, partial reels, boxed coils and usable cut lengths. To sell Encore wire, send photos of the lot, manufacturer markings and remaining footage for review and a written offer before pickup. We buy this material for resale and reuse, not as scrap metal by the pound.

0100 FTWho makes Encore Wire, and why does the name matter?

Encore Wire is based in McKinney, Texas. Prysmian completed its acquisition of Encore Wire on July 2, 2024; that announcement describes Encore's single-campus production model and centralized distribution. Prysmian's company profile continues to identify the McKinney campus as Encore's manufacturing base.

For a surplus seller, the practical point is to preserve the identity printed on the actual wire. Do not relabel an Encore reel as another Prysmian product because the companies share ownership. Our wire brands we buy overview explains how manufacturer identification helps organize mixed inventory.

The Encore Wire brand name and trademarks belong to their respective owners. Ohio Wire Buyers is not affiliated with, endorsed by or an authorized dealer of Encore Wire or Prysmian. We buy surplus product that sellers already own.

0200 FTWhich products can you sell as Encore wire surplus?

Encore's catalog covers copper and aluminum building wire, residential cable and armored assemblies. Ohio businesses can submit leftovers from electrical installations, unused distributor stock or plant inventory; the product's identity and condition determine whether it can be reviewed for reuse.

Describe each item by its actual markings, not merely as “Encore copper.” A residential cable coil, feeder conductor and armored assembly require different information even when they carry the same manufacturer name.

0300 FTHow do you identify Encore on a reel and jacket?

Encore's copper THHN specification gives print legends using ENCORE WIRE CORP or ENCORE WIRE CORPORATION, followed by size and wire-type information. The listed construction uses copper conductors, PVC insulation and a nylon outer covering; the specification covers 14 AWG through 1000 kcmil and 600-volt applications. Those details identify a product family, not the remaining contents of a particular reel.

Photograph a readable stretch of print with the reel tag. The tag may describe the original order while the wire has since been cut, transferred or partly used. If they disagree, flag the difference rather than choosing whichever description seems more valuable.

Keep size, conductor material, type designation and color together in your inventory. The guide to reading a wire reel tag helps separate product information from shipping and order references.

0400 FTWhat do SuperSlick Elite and colored labels tell you?

The manufacturer's product name is SuperSlick Elite, rather than simply “Super Slick.” Encore describes it as an outer-jacket technology intended to reduce friction during pulling. It is not a substitute for the printed wire type, and it does not prove that a previously pulled length remains undamaged.

Encore also uses SmartColorID labels on certain metal-clad and armor-clad cables to identify gauge, conductor count, cable type and inner-conductor colors. Photograph those labels before removing wrapping or separating coils. Avoid slashing armor or jackets to find information already printed on the cable.

For NM-B, color can help sort a lot, but the printed size remains essential. Encore's November 2024 specification lists white for 14/2, blue for 14/3, yellow for 12/2, purple for 12/3, orange for 10/2 and pink for 10/3. Do not assume older inventory follows that sheet's color scheme; show the actual legend and describe the visible jacket color separately.

0500 FTHow should you document footage on partial reels?

Encore's December 2025 copper THHN sheet specifies sequential footage marks for 250 kcmil and larger. It lists marks on master reels for 1 AWG through 4/0 AWG unless otherwise specified. That distinction matters: a smaller partial reel may not provide the same measurement clues as a larger feeder reel.

Photograph accessible footage marks and explain where they appear. Encore's SmartCount system uses countdown markings on designated master reels, so note the numbering direction instead of assuming every sequence increases. Marks are useful evidence, but a break or splice means a reel may contain separate lengths rather than one continuous run.

If footage is unknown, give an estimate and state how you obtained it. Keep the original tag's starting quantity separate from the remaining quantity. Our partial-reel measurement guide explains how to document uncertainty without presenting a guess as measured footage.

0600 FTWhat condition details affect a reuse offer?

An identifiable product still needs usable insulation, jackets and conductors. Show crushed flanges, exposed cut ends, deep scrapes, kinks, heat damage, corrosion or damaged armor. Tell us whether the material stayed in storage, was pulled through a raceway or was removed from service.

Keep continuous lengths intact. Cutting feeder wire into short pieces or stripping its jacket changes its usefulness and destroys some of its identification. Record separate cut lengths individually rather than combining their footage into a supposed continuous reel.

Ohio Wire Buyers reviews type, size, conductor material, footage, condition, packaging, documentation and demand when considering an offer. A recognizable brand does not guarantee acceptance or a price. If the wire is not reusable, we say so; our surplus value versus scrap price guide explains why the two buying approaches differ.

0700 FTWhat should you send for an Encore offer?

Send a whole-lot photo first, then identify each reel, box or coil consistently in the footage list and close-ups. For Encore inventory, include:

• Reel tags and readable ENCORE jacket legends, including the complete wire-type designation.
• Size, copper or aluminum conductor material, color and remaining continuous footage for each item.
• SuperSlick Elite markings, MC identification labels and accessible sequential footage marks where present.
• Existing cut-end photos, reel-condition photos and notes about storage, installation history or damage.
• An invoice, purchase order, closeout paperwork or company letter supporting ownership.

For NM-B, include conductor count and ground designation, not just jacket color. For MC, distinguish the armor material from the conductor material. For mixed or re-reeled stock, explain what changed and retain the original labels if available.

We verify the seller and ownership and keep a written purchase record. After reviewing your information, we reply with questions or a written offer. The surplus-wire selling process covers how the offer and pickup terms fit together.

0800 FTHow is pickup handled for an Ohio Encore lot?

Ohio Wire Buyers arranges pickup at the seller's jobsite, warehouse, plant or yard anywhere in Ohio. We have no Ohio street address, office or yard; sellers do not bring material to us. Include the material's location, access restrictions, dock or forklift availability and any damaged reels that could complicate loading.

Payment method and timing are confirmed in writing before pickup. At pickup, we check the count against the written terms, so keep accepted items identifiable and report changes to the lot before arrangements are finalized.

To sell Encore wire without losing its product identity, leave the reels and markings intact and request an offer for your surplus lot. Send the tags, footage and condition photos, or call 951-403-5738 to discuss what you have.