Sell Nexans Cable & AmerCable in Ohio

Ohio Wire Buyers buys reusable surplus Nexans and AmerCable wire and cable from businesses anywhere in Ohio, including unused full reels, partial reels and usable cut lengths. To sell Nexans cable or AmerCable surplus, send photos of the reel tags, jacket print, cut ends and whole lot with a footage list or estimate; we review the material for resale and reuse, not as scrap metal by the pound.

0100 FTCan you sell Nexans cable with an older AmerCable label?

Yes, older branding is useful identification information, not a reason to discard the cable. Nexans sold AmerCable to Mattr on January 2, 2025. AmerCable's announcement says the business would again operate as AmerCable and identifies El Dorado, Arkansas, as its mining and industrial group headquarters, with its oil and gas group headquarters in Katy, Texas.

Nexans is a French cable manufacturer; its current legal notice lists its company address in Puteaux, France. An older Nexans AmerCable tag therefore reflects a different ownership period from current AmerCable inventory. Keep the original tag rather than replacing its manufacturer name with the current parent company's name.

Nexans, AmerCable, Tiger Brand and other brand names and trademarks belong to their respective owners. Ohio Wire Buyers is not affiliated with, endorsed by or an authorized dealer of either manufacturer. We buy surplus product that sellers already own; our wire and cable brand overview explains why preserving manufacturer identification matters.

0200 FTWhich AmerCable products need separate identification?

AmerCable's industrial lineup includes DLO, industrial G-GC, medium-voltage, variable-frequency-drive and ship-to-shore power cables. Its mining catalog documents Tiger Brand constructions with different arrangements of power conductors, grounding conductors, ground-check wires and shielding. These are not interchangeable simply because the jackets look similar.

Group mining and portable-power cable separately from ordinary building-wire leftovers. Likewise, label surplus DLO cable by its actual markings rather than calling every flexible single conductor a welding lead.

0300 FTWhat should the jacket print and reel tag tell you?

Start with the printed manufacturer name, then record the cable type, conductor size, conductor count and voltage rating. AmerCable publishes an industrial G-GC marking example that identifies AMERCABLE, Type G-GC, the size, 3/C and 2000V. That example describes a particular construction, not a rating that can be assigned to every AmerCable reel.

The same product page gives different permanent-marking examples for UL and CSA constructions. Photograph all the visible approval and resistance markings instead of shortening the description to “mining cable.” A marking on one product does not establish the approvals of another reel from the same manufacturer.

Compare the jacket legend with the factory tag and any purchase description. If they disagree, photograph both and explain whether the cable was re-reeled or the flange was reused. Our guides to reading cable jacket print and decoding a wire reel tag help separate product identification from inventory notes written on the wood.

0400 FTHow should you describe tray, drive and armored lots?

For plant leftovers, “black industrial cable” is not enough. A variable-frequency-drive cable lot needs its shield and grounding arrangement documented, while power or control tray cable should be identified by the actual type markings and conductor configuration. Do not add an exposed-run or hazardous-location designation because the cable came from that kind of installation.

For armored material, show the outside jacket and any exposed armor at an existing end. Do not cut a good length open just to make a sample. Send the product number or original specification if available; a protective outer layer and an electrical shield are different features, and neither can be reliably identified from the reel's overall appearance.

0500 FTWhen are partial reels and removed cables still reusable?

A partial reel can be considered when its identity, remaining continuous length and condition are clear. Keep separate cuts listed separately; adding their lengths together does not create one continuous run. Use footage marks where available and label uncertain quantities as estimates, following our guide to measuring wire left on a reel.

Condition matters especially with trailing cable that has moved with equipment. Show flattened sections, cuts, exposed reinforcement, jacket repairs and damaged couplers rather than photographing only the clean outer wraps. Describe whether the material is unused surplus or previously installed cable, and explain any known repairs or service exposure.

Used cable is considered only if it remains reusable. Removal must be handled by qualified people after safe de-energization; do not disturb connected equipment to prepare an offer request. If the cable is not reusable, we say so, and a scrap metal recycler may be the right buyer. The surplus value versus scrap-price guide explains that distinction without assuming every heavy cable has resale value.

0600 FTWhat should you send for an AmerCable or Nexans offer?

Send a whole-lot photo first, then connect each close-up to a reel or coil identifier. For this material, the most useful details are:

• The complete factory tag and readable jacket legend, including any older Nexans AmerCable wording.
• Conductor size, power-conductor count, voltage marking and product or catalog number.
• Photos of existing cut ends showing grounds, ground-check wires, shielding or armor where visible.
• Remaining continuous footage for each reel or cut, with measured lengths distinguished from estimates.
• Whether the cable is unused, installed and removed, repaired or fitted with couplers or lugs.
• Storage history, visible damage and the paperwork establishing company ownership.

Keep unlike products on separate lines even when they came from the same purchase order. For plant surplus inventory, include the original equipment or project specification if it identifies a special cable construction. That documentation helps explain the product; it does not replace photos of what is actually available now.

0700 FTWhat is Nexans's verified Ohio connection?

On June 1, 2026, Nexans announced its completed acquisition of Republic Wire. The announcement identifies Republic Wire as headquartered in Cincinnati, Ohio, and describes its low-voltage copper and aluminum wire products. This is a documented Ohio manufacturing connection, separate from AmerCable's former ownership by Nexans.

It does not establish that a particular reel was manufactured in Ohio or supplied to a named project. Use the reel's own manufacturer and product markings. Ohio Wire Buyers can review reusable surplus held anywhere in the state without implying a relationship with Nexans, Republic Wire or AmerCable.

0800 FTHow are the offer and pickup handled?

Ohio Wire Buyers reviews the photos and footage information, then replies with questions or a written offer before pickup. Payment method and timing are confirmed in writing before pickup. We verify the seller and proof of ownership, such as an invoice, purchase order, closeout paperwork or company letter, and keep a written purchase record.

We arrange pickup at your Ohio jobsite, warehouse, plant or yard and check the count against the written terms. Tell us about loading equipment, access restrictions and damaged reels when submitting the lot. Material is picked up from sellers; Ohio Wire Buyers has no Ohio street address, office or yard. The selling process explains the pickup arrangement.

Ready to clear identifiable, reusable surplus? Request a written offer for your Nexans or AmerCable lot, or call 951-403-5738 with the cable markings and remaining footage available.